機種情報/ネットワーク/crontab は稼働するOBから不定期に設定値を取得&保存しています
Linux cv120095 3.2.54 #1 Fri Aug 21 16:21:24 JST 2015 armv5tel GNU/Linux※[ppc=600系][armv5tel=A7]
lo:※link/ether以降がMACアドレスmtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qdisc pfifo_fast state UP qlen 532 link/ether 00:0a:85:09:28:f8 brd ff:ff:ff:ff:ff:ff inet 192.168.6.95/24 brd 192.168.6.255 scope global eth0 inet6 fe80::20a:85ff:fe09:28f8/64 scope link valid_lft forever preferred_lft forever 3: eth1: mtu 1500 qdisc pfifo_fast state UP qlen 532 link/ether 00:0a:85:09:28:f9 brd ff:ff:ff:ff:ff:ff inet 172.16.129.124/24 brd 172.16.129.255 scope global eth1 inet6 fe80::20a:85ff:fe09:28f9/64 scope link valid_lft forever preferred_lft forever
文字列全体 : lo:※inet以降がIPアドレス、サブネットマスクは[/24=255.255.255.0][/16=255.255.0.0][/8=255.0.0.0]mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever eth0: mtu 1500 qdisc pfifo_fast state UP qlen 532 link/ether 00:0a:85:09:28:f8 brd ff:ff:ff:ff:ff:ff inet 192.168.6.95/24 brd 192.168.6.255 scope global eth0 inet6 fe80::20a:85ff:fe09:28f8/64 scope link valid_lft forever preferred_lft forever 3: eth1: mtu 1500 qdisc pfifo_fast state UP qlen 532 link/ether 00:0a:85:09:28:f9 brd ff:ff:ff:ff:ff:ff inet 172.16.129.124/24 brd 172.16.129.255 scope global eth1 inet6 fe80::20a:85ff:fe09:28f9/64 scope link valid_lft forever preferred_lft forever
文字列全体 : default via 192.168.6.1 dev eth0 172.16.129.0/24 dev eth1 proto kernel scope link src 172.16.129.124 192.168.6.0/24 dev eth0 proto kernel scope link src 192.168.6.95※default via IPアドレスが該当部分
ファイルサーバなし(ネットワークドライブ)
# Edit this file to introduce tasks to be run by cron. # # Each task to run has to be defined through a single line # indicating with different fields when the task will be run # and what command to run for the task # # To define the time you can provide concrete values for # minute (m), hour (h), day of month (dom), month (mon), # and day of week (dow) or use '*' in these fields (for 'any').# # Notice that tasks will be started based on the cron's system # daemon's notion of time and timezones. # # Output of the crontab jobs (including errors) is sent through # email to the user the crontab file belongs to (unless redirected). # # For example, you can run a backup of all your user accounts # at 5 a.m every week with: # 0 5 * * 1 tar -zcf /var/backups/home.tgz /home/ # # For more information see the manual pages of crontab(5) and cron(8) # # m h dom mon dow command */1 * * * * sleep 21;/work/tools/main/ping.sh > /dev/null 2>&1 */5 0-3,5-23 * * * sleep 21;/work/tools/main/srvping.sh > /dev/null 2>&1 */10 9-23,0-1 * * * /work/tools/main/HCWATCH/run.sh > /dev/null 2>&1 51 3,8,21 * * * sqlite3 /work/tools/main/HCWATCH/data/filedb.sqlite3 reindex > /dev/null 2>&1 0 * * * * . /work/tools/main/config.txt;crontab -l > /home/hallcom/cron_${NODE}.txt;chown hallcom.hallcom /home/hallcom/cron_${NODE}.txt > /dev/null 2>&1 41 3,8,21 * * * /work/tools/main/HCWATCH/cleanworkfile.sh > /dev/null 2>&1 3 12,16,20,23 * * * sleep 21;/work/tools/main/synctools.sh > /dev/null 2>&1 27,57 9-23 * * * sleep 21;/work/tools/main/takeorder.sh > /dev/null 2>&1
運用状態 | HC形式 | HC側ID | EP側店舗ID | 店舗名 |
---|---|---|---|---|
仮転送 | ZEZKbyKITAC | 01 | ex01_848_0 | 3262 ヴィーナス海上店 |